Joule Thomson System

jt2mm.2-4-2-.jpgThe Joule Thomson System, or JTS, simultaneously reduces the water dew point of gas, recovers valuable hydrocarbon liquids and lowers the BTU of the gas stream to sales contract specifications or levels suited for high-speed engines. Gas enters the Joule Thomson System and travels through a series of heat exchangers that pre-cool the gas. The gas then passes through the JT  valve taking a pressure drop and cooling further. Liquids are collected in the cold separator and sent to storage tanks. The cold gas then travels back through the heat exchanger and exits the Joule Thomson System.

It is recommended that the JTS be serviced on a 30-days schedule to ensure the system is running properly, as well as the parts.As with any system, there are parts that can wear down over time. 

 

 

Joule Thomson (JT) Parts

  • BMD

    BMD CH20-C Carbon Steel Chamber

    BMD's CH20 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers. Chambers offer the benefit of isolating the process fluid from the turbulence of the main vessel...

    $240.00
    Add to Cart
  • BMD

    CV10 Control Valve

    The CV10 is suited for wide range of applications such as flow control, pressure control and level control. Typical areas of installation include wellheads, separators, scrubbers and other production equipment. The CV10's hammer union allows maintenance...

    $400.00
    Choose Options
  • BMD

    LC10 Pneumatic Level Controller

    The LC10 liquid level controller is a rugged, displacer operated liquid level controller that is ideal for use on scrubbers, separators, heater treaters or anywhere else liquid level control is needed. Its industry-proven force balance design allows for...

    $365.00
    Choose Options
  • BMD

    RG10 Pressure Regulator

    The RG10, commonly referred to as "Big Joe," is a High Pressure, direct spring operated, pressure regulator. Its high pressure, heavy duty design makes it ideal for pressure regulation in the oil and natural gas industry. Typical applications include...

    $235.00
    Choose Options
  • BMD

    RG20 Pressure Regulator

    The RG20, commonly referred to as "Little Joe," is a direct spring operated, pressure regulator that can be used anywhere pressure regulation of natural gas, air or other gas is required. Its housing can be moved to one of four positions to save space...

    $135.00
    Choose Options
  • BMD

    RG30 Pressure Regulator

    The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots, positioners or other pneumatic controls. It features an internal relief to help maintain an accurate downstream pressure, rugged aluminum housing construction...

  • The RG40 is a compact, high pressure, spring operated regulator designed to reduce high pressures down to working pressures. It features a rugged brass body and housing with a durable metal diaphragm and nylon disk for handling high pressure drops.

    BMD

    RG40 Pressure Regulator

    The RG40 is a compact, high pressure, spring operated regulator designed to reduce high pressures down to working pressures. It features a rugged brass body and housing with a durable metal diaphragm and nylon disk for handling high pressure drops...

  • BMD

    RV10 Pressure Safety Valve

    The RV10 safety relief valve is well-suited for overpressure protection of production equipment, including compressors, scrubbers, separators, pipelines or anywhere overpressure protection may be required. The RV10 design incorporates a non-rising stem...

    $140.00
    Choose Options