Joule Thomson System

jt2mm.2-4-2-.jpgThe Joule Thomson System, or JTS, simultaneously reduces the water dew point of gas, recovers valuable hydrocarbon liquids and lowers the BTU of the gas stream to sales contract specifications or levels suited for high-speed engines. Gas enters the Joule Thomson System and travels through a series of heat exchangers that pre-cool the gas. The gas then passes through the JT  valve taking a pressure drop and cooling further. Liquids are collected in the cold separator and sent to storage tanks. The cold gas then travels back through the heat exchanger and exits the Joule Thomson System.

It is recommended that the JTS be serviced on a 30-days schedule to ensure the system is running properly, as well as the parts.As with any system, there are parts that can wear down over time. 

 

 

Joule Thomson (JT) Parts

  • The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots.

    BMD

    BMD RG30 Pressure Reducing Regulator

    The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots, positioners or other pneumatic controls. It features an internal relief to help maintain an accurate downstream pressure, rugged aluminum housing construction...

    $60.78
    This item is temporarily out of stock.
  • RG10 Pressure Regulator

    BMD

    RG10 Pressure Regulator

    The RG10, commonly referred to as "Big Joe," is a High Pressure, direct spring operated, pressure regulator. Its high pressure, heavy duty design makes it ideal for pressure regulation in the oil and natural gas industry. Typical applications include...

    $408.85
    Choose Options
  • The LC10 liquid level controller is a rugged, displacer operated liquid level controller (Photo)

    BMD

    LC10 Pneumatic Level Controller

    The LC10 liquid level controller is a rugged, displacer operated liquid level controller that is ideal for use on scrubbers, separators, heater treaters or anywhere else liquid level control is needed. Its industry-proven force balance design allows for...

    $640.90
    Choose Options
  • Water Vapor Detection tubes designed for H20 detection in natural gas streams.

    BMD

    CV10 Control Valve

    The CV10 is suited for wide range of applications such as flow control, pressure control and level control. Typical areas of installation include wellheads, separators, scrubbers and other production equipment. The CV10's hammer union allows maintenance...

    $530.40
    This item is temporarily out of stock.
  • For temperature-controlled system shutdown until manually reset.

    Kimray

    T12 Manual Reset, HAM

    For temperature-controlled system shutdown until manually reset. Connection Size: 0.5 " Connection Type: Male NPT Body Material: Cast Ductile Process Fluid: Gas Pilot Type: Vent Pilot...

    $588.19
    Add to Cart
  • The Kimray T12 Temperature Controller has a modulated, or throttling, signal output.

    Kimray

    T12 Thermostat

    Lead time: 2 weeks *CALL FOR AVAILABILITY*   The Kimray T12 Temperature Controller has a modulated, or throttling, signal output. Can be direct or indirect signal output based on how it is installed. Connection Size: 0.5 " Connection...

    $240.00
    Add to Cart
  • The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure.

    Kimray

    30 HPG-D REG PILOT, AHJ

    The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. These pilots are commonly used on control valves to operate them as Backpressure or Pressure Reducing regulators.

    $545.71
    This item is temporarily out of stock.
  • PG150 Pilot, AFZ

    Kimray

    PG150 Pilot, AFZ

    The Kimray 150 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 150 PG Pilot has a set pressure range of 150-1500 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

    $1,304.97
    Add to Cart