Fuel Gas Conditioning System 

fcs-100-angle-cropped.png Fuel gas conditioning system can be anything the processes fuel gas for compressor fuel or instrumentation gas. For example Croft Production Systems, Inc’s fuel-gas conditioning system, or FCS, is a one-of-a-kind system that is engineered to remove water and reduce the British Thermal Unit, or BTU, to levels that compressors and other instruments can use. 

It is recommended that the FCS be serviced on a 30-day schedule to ensure the system is running properly, as well as the parts. An FCS plant relies heavily on its parts to achieve a pressure drop and as with any system, there are many parts that can wear down over time. 

Fuel Gas Conditioning Parts

  • The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure.

    Kimray

    (230 SGT BP-D) Backpressure Valve

    The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems. Utilizes process gas to operate...

    $554.00
    Add to Cart
  • 1" Kimray Valve. Used as Dump Valve or Pressure Regulator.

    Kimray

    1" HPCV

    1" valve. Used as Dump Valve or Pressure Regulator. The Stem Guided valves have smaller trim sizes for smaller valve coefficients (Cv) compared to the Cage Guided series. "Stem-guided" refers to the stem itself guiding the trim into its seat...

    $400.00
    Choose Options
  • The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure.

    Kimray

    30 HPG-D REG PILOT

    The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. These pilots are commonly used on control valves to operate them as Backpressure or Pressure Reducing regulators.

    $328.00
    This item is temporarily out of stock.
  • The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots.

    BMD

    BMD RG30 Pressure Reducing Regulator

    The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots, positioners or other pneumatic controls. It features an internal relief to help maintain an accurate downstream pressure, rugged aluminum housing construction...

  • Water Vapor Detection tubes designed for H20 detection in natural gas streams.

    BMD

    CV10 Control Valve

    The CV10 is suited for wide range of applications such as flow control, pressure control and level control. Typical areas of installation include wellheads, separators, scrubbers and other production equipment. The CV10's hammer union allows maintenance...

    $400.00
    Choose Options
  • EUA3 Low Pressure Control Valve Kimray

    Kimray

    EUA3 Low Pressure Control Valve

      Connection Size: 1 " Connection Type: Female NPT Body Style: Through Body Body Material: Cast Ductile Trim Size: 0.5 " Trim Type: Modified EP Seal Class: Class VI Process Fluid: Liquid and Gas Max...

    $135.00
    Choose Options
  • The LC10 liquid level controller is a rugged, displacer operated liquid level controller (Photo)

    BMD

    LC10 Pneumatic Level Controller

    The LC10 liquid level controller is a rugged, displacer operated liquid level controller that is ideal for use on scrubbers, separators, heater treaters or anywhere else liquid level control is needed. Its industry-proven force balance design allows for...

    $365.00
    Choose Options
  • Kimray

    PG150 Pilot

    The Kimray 150 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 150 PG Pilot has a set pressure range of 150-1500 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

    $922.00
    Add to Cart