Separators 

separator-nobackground.pngSeparators are vessels for the bulk removal of liquids or solids by gravity.

Operators prefer to utilize a horizontal separator over other separators when the well streams have large liquid to gas ratios, constant flow, and small liquid surge characteristics (high liquid/ gas). Other reasons could be when work areas have vertical height limitations or horizontal separators are smaller and less expensive than vertical separators for a given gas capacity or well streams experiencing foamy production for well streams requiring three-phase separation applications with more efficient liquid-liquid separation.

Operators prefer to utilize a horizontal separator over other separators when the well streams have large liquid to gas ratios, constant flow, and small liquid surge characteristics (high liquid/ gas). Other reasons could be when work areas have vertical height limitations. Horizontal separators are smaller and less expensive than vertical separators for a given gas capacity or well streams experiencing foamy production or well streams requiring three-phase separation applications with more efficient liquid-liquid separation

Separator Parts

  • The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure.

    Kimray

    (230 SGT BP-D) Backpressure Valve

    The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems. Utilizes process gas to operate...

    $554.00
    Add to Cart
  • 1" Kimray Valve. Used as Dump Valve or Pressure Regulator.

    Kimray

    1" HPCV

    1" valve. Used as Dump Valve or Pressure Regulator. The Stem Guided valves have smaller trim sizes for smaller valve coefficients (Cv) compared to the Cage Guided series. "Stem-guided" refers to the stem itself guiding the trim into its seat...

    $443.40
    Choose Options
  • The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure.

    Kimray

    30 HPG-D REG PILOT

    The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. These pilots are commonly used on control valves to operate them as Backpressure or Pressure Reducing regulators.

    $328.00
    This item is temporarily out of stock.
  • Typically used as a Burner Valve or Liquid Dump Valve for low pressure vessels

    Kimray

    ABC2 Low Pressure Control Valve (Adjustable)

    Typically used as a Burner Valve or Liquid Dump Valve for low pressure vessels Connection Size: 1 " Connection Type: Female NPT Body Style: Through Body Body Material: Cast Ductile Trim Size: 0.5 " Process...

    $167.00
    This item is temporarily out of stock.
  • BMD's CH10 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers.

    BMD

    BMD CH10 Carbon Steel Chamber

    BMD's CH10 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers. Chambers offer the benefit of isolating the process fluid from the turbulence of the main vessel...

    $500.00
    Add to Cart
  • BMD's CH20 chambers are designed to be used with the series LC10 liquid level controller.

    BMD

    BMD CH20-C Carbon Steel Chamber

    BMD's CH20 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers. Chambers offer the benefit of isolating the process fluid from the turbulence of the main vessel...

    $240.00
    Add to Cart
  • The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots.

    BMD

    BMD RG30 Pressure Reducing Regulator

    The RG30 is a compact, spring-operated regulator normally used to supply air or gas to pilots, positioners or other pneumatic controls. It features an internal relief to help maintain an accurate downstream pressure, rugged aluminum housing construction...

  • Water Vapor Detection tubes designed for H20 detection in natural gas streams.

    BMD

    CV10 Control Valve

    The CV10 is suited for wide range of applications such as flow control, pressure control and level control. Typical areas of installation include wellheads, separators, scrubbers and other production equipment. The CV10's hammer union allows maintenance...

    $400.00
    Choose Options
  • BMD

    Electric Level Switch, 2" NPT Connection, BMD, LC20E-CT1

    The LC20P is a pneumatic high-pressure, float operated, normally open or normally closed, liquid level switch. The high or low level switch can be installed directly into a vessel or used with an external float chamber. Can also be used as a dump valve...

    $215.00
    Add to Cart