Separators 

separator-nobackground.pngAn oil and gas separator is used for removing and collecting liquids from natural gas. A properly designed separator will also provide the release of entrained gases from the accumulated hydrocarbon liquids. These separators can go by many names or different purposes like liquid separators, oil separators, water and oil separators, etc., but the most common separators are a two-phase; separates gas from liquid or three phase; separates gas, oil and water. All of the separators use gravity to separate.

Separator Parts

  • BMD's CH10 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers.

    BMD

    BMD CH10 Carbon Steel Chamber

    BMD's CH10 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers. Chambers offer the benefit of isolating the process fluid from the turbulence of the main vessel...

    $606.65
    Add to Cart
  • BMD's CH20 chambers are designed to be used with the series LC10 liquid level controller.

    BMD

    BMD CH20-C Carbon Steel Chamber

    BMD's CH20 chambers are designed to be used with the series LC10 liquid level controller, but may be used with other types of level switches and controllers. Chambers offer the benefit of isolating the process fluid from the turbulence of the main vessel...

    $371.28
    Add to Cart
  • EUA3 Low Pressure Control Valve Kimray

    Kimray

    EUA3 Low Pressure Control Valve

      Connection Size: 1 " Connection Type: Female NPT Body Style: Through Body Body Material: Cast Ductile Trim Size: 0.5 " Trim Type: Modified EP Seal Class: Class VI Process Fluid: Liquid and Gas Max...

    $248.42
    This item is temporarily out of stock.
  • 1" x 12" Carbon Steel

    Kimray

    Thermowell

    Lead time: 8 weeks *CALL FOR AVAILABILITY*   Protects the sensing element of the Kimray T-12 Thermostat and allows for the removal of the thermostat without losing vessel pressure. Connection Type: Male NPT 1" x 12" Carbon Steel and Stainless...

    $52.47
    Choose Options
  • 1" Kimray Valve. Used as Dump Valve or Pressure Regulator.

    Kimray

    1" HPCV

    1" valve. Used as Dump Valve or Pressure Regulator. The Stem Guided valves have smaller trim sizes for smaller valve coefficients (Cv) compared to the Cage Guided series. "Stem-guided" refers to the stem itself guiding the trim into its seat...

    $635.65
    Choose Options
  • The Kimray 75 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure.

    Kimray

    PG75

    The Kimray 75 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 75 PG Pilot has a set pressure range of 75-750 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

    $1,393.25
    Add to Cart
  • The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure.

    Kimray

    (230 SGT BP-D) Backpressure Valve, AAR

    The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems. Utilizes process gas to operate...

    $806.39
    Add to Cart
  • The RG40 is a compact, high pressure, spring operated regulator designed to reduce high pressures down to working pressures.

    BMD

    RG40 Pressure Regulator

    The RG40 is a compact, high pressure, spring operated regulator designed to reduce high pressures down to working pressures. It features a rugged brass body and housing with a durable metal diaphragm and nylon disk for handling high pressure drops...

    $154.70
    This item is temporarily out of stock.