Chemical Injection System

cis-mk.3.jpgThe Chemical Injection System, or CIS for short, is utilized for a wide range of gas processing problems such as the presence of paraffin, hydrates, high salt content, and many other production difficulties. The CIS is an environmentally friendly alternative to an Amine plant regarding the removal of H2S. The chemical injection process is any chemical that is being introduced to the gas stream to remove impurities or contaminants

It is recommended that the chemical injection system be serviced on a weekly basis to ensure the system is running properly, as well as the parts. As with any system, there are many parts that can wear down over time. 

Chemical Injection Parts

  • Kimray

    (230 SGT BP-D) Backpressure Valve

    The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems. Utilizes process gas to operate...

    $455.00
    Add to Cart
  • Kimray

    1" HPCV

    1" valve. Used as Dump Valve or Pressure Regulator. The Stem Guided valves have smaller trim sizes for smaller valve coefficients (Cv) compared to the Cage Guided series. "Stem-guided" refers to the stem itself guiding the trim into its seat...

    $400.00
    Choose Options
  • Kimray

    30 HPG-D REG PILOT

    The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. These pilots are commonly used on control valves to operate them as Backpressure or Pressure Reducing regulators.

    $295.00
    Add to Cart
  • BMD

    CV10 Control Valve

    The CV10 is suited for wide range of applications such as flow control, pressure control and level control. Typical areas of installation include wellheads, separators, scrubbers and other production equipment. The CV10's hammer union allows maintenance...

    $400.00
    Choose Options
  • EUA3

    Kimray

    EUA3 Low Pressure Control Valve

      Connection Size: 1 " Connection Type: Female NPT Body Style: Through Body Body Material: Cast Ductile Trim Size: 0.5 " Trim Type: Modified EP Seal Class: Class VI Process Fluid: Liquid and Gas Max...

    $125.00
    Choose Options
  • BMD

    LC10 Pneumatic Level Controller

    The LC10 liquid level controller is a rugged, displacer operated liquid level controller that is ideal for use on scrubbers, separators, heater treaters or anywhere else liquid level control is needed. Its industry-proven force balance design allows for...

    $365.00
    Choose Options
  • Kimray

    PG150 Pilot

    The Kimray 150 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 150 PG Pilot has a set pressure range of 150-1500 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

    $755.00
    Add to Cart
  • Kimray

    PG75

    The Kimray 75 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 75 PG Pilot has a set pressure range of 75-750 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

    $810.00
    Add to Cart