Amine Plant 

amine.pngThe Amine gas treatment plant is also referred to as the Gas Sweetening System. The plant brings in sour gas (gas that contains hydrogen sulfide, and carbon dioxide) which are frequently found in raw natural gas streams. Carbonic acid, a very highly corrosive mixture, is created when CO2 is combined with water. H2S is highly toxic in concentrated amounts, so it is very important to remove these compounds safely and as soon as possible to avoid damage to equipment and personnel.

Amine plants can be serviced at different frequencies depending on the size and design. For example, some amine plants require 24/7 service and others can go for a week without service to ensure the system is running properly, as well as the parts. An amine plant relies heavily on properly functioning parts, which can degrade quickly in corrosive environments.

 

 

 

Amine Plant Parts

  • EUA3 Low Pressure Control Valve Kimray

    Kimray

    EUA3 Low Pressure Control Valve

      Connection Size: 1 " Connection Type: Female NPT Body Style: Through Body Body Material: Cast Ductile Trim Size: 0.5 " Trim Type: Modified EP Seal Class: Class VI Process Fluid: Liquid and Gas Max...

    $342.28
    Add to Cart
  • 1" x 12" Carbon Steel

    Kimray

    Thermowell

    Lead time: 8 weeks *CALL FOR AVAILABILITY*   Protects the sensing element of the Kimray T-12 Thermostat and allows for the removal of the thermostat without losing vessel pressure. Connection Type: Male NPT 1" x 12" Carbon Steel and Stainless...

  • 1" Kimray Valve. Used as Dump Valve or Pressure Regulator.

    Kimray

    1" HPCV

    1" valve. Used as Dump Valve or Pressure Regulator. The Stem Guided valves have smaller trim sizes for smaller valve coefficients (Cv) compared to the Cage Guided series. "Stem-guided" refers to the stem itself guiding the trim into its seat...

    $755.00
    Choose Options
  • The Kimray 75 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure.

    Kimray

    PG75

    The Kimray 75 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 75 PG Pilot has a set pressure range of 75-750 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

    $1,380.04
    Add to Cart
  • The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure.

    Kimray

    (230 SGT BP-D) Backpressure Valve, AAR

    The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems. Utilizes process gas to operate...

    $798.75
    Add to Cart
  • For temperature-controlled system shutdown until manually reset.

    Kimray

    T12 Manual Reset, HAM

    For temperature-controlled system shutdown until manually reset. Connection Size: 0.5 " Connection Type: Male NPT Body Material: Cast Ductile Process Fluid: Gas Pilot Type: Vent Pilot...

    $582.61
    Add to Cart
  • The Kimray T12 Temperature Controller has a modulated, or throttling, signal output.

    Kimray

    T12 Thermostat

    Lead time: 2 weeks *CALL FOR AVAILABILITY*   The Kimray T12 Temperature Controller has a modulated, or throttling, signal output. Can be direct or indirect signal output based on how it is installed. Connection Size: 0.5 " Connection...

    $240.00
    Add to Cart
  • The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure.

    Kimray

    30 HPG-D REG PILOT, AHJ

    The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. These pilots are commonly used on control valves to operate them as Backpressure or Pressure Reducing regulators.

    $540.54
    Add to Cart