Applications

Kimray

EUA3 Low Pressure Control Valve

  Connection Size: 1 " Connection Type: Female NPT Body Style: Through Body Body Material: Cast Ductile Trim Size: 0.5 " Trim Type: Modified EP Seal Class: Class VI Process Fluid: Liquid and Gas Max...

Kimray

Thermowell

Lead time: 8 weeks *CALL FOR AVAILABILITY*   Protects the sensing element of the Kimray T-12 Thermostat and allows for the removal of the thermostat without losing vessel pressure. Connection Type: Male NPT 1" x 12" Carbon Steel and Stainless...

Kimray

1" HPCV

1" valve. Used as Dump Valve or Pressure Regulator. The Stem Guided valves have smaller trim sizes for smaller valve coefficients (Cv) compared to the Cage Guided series. "Stem-guided" refers to the stem itself guiding the trim into its seat...

Kimray

PG75

The Kimray 75 PG Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. The 75 PG Pilot has a set pressure range of 75-750 PSIG. These pilots are commonly used on control valves to operate them as Backpressure or...

Kimray

(230 SGT BP-D) Backpressure Valve, AAR

The Kimray Back Pressure valve controls pressure upstream of the valve by adjusting the set point to the desired max upstream pressure. Used on separators, flow treaters, compressor stations, and gas gathering systems. Utilizes process gas to operate...

BMD

RG20 Pressure Regulator

The RG20, commonly referred to as "Little Joe," is a direct spring operated, pressure regulator that can be used anywhere pressure regulation of natural gas, air or other gas is required. Its housing can be moved to one of four positions to save space...

BMD

Popoff Pressure Safety Valve, 1" NPT Threaded, BMD-RV10

The RV10 safety relief valve is well-suited for overpressure protection of production equipment, including compressors, scrubbers, separators, pipelines or anywhere overpressure protection may be required. The RV10 design incorporates a non-rising stem...

BMD

RG10 Pressure Regulator

The RG10, commonly referred to as "Big Joe," is a High Pressure, direct spring operated, pressure regulator. Its high pressure, heavy duty design makes it ideal for pressure regulation in the oil and natural gas industry. Typical applications include...

BMD

LC10 Pneumatic Level Controller

The LC10 liquid level controller is a rugged, displacer operated liquid level controller that is ideal for use on scrubbers, separators, heater treaters or anywhere else liquid level control is needed. Its industry-proven force balance design allows for...

Kimray

T12 Manual Reset, HAM

For temperature-controlled system shutdown until manually reset. Connection Size: 0.5 " Connection Type: Male NPT Body Material: Cast Ductile Process Fluid: Gas Pilot Type: Vent Pilot...

Kimray

T12 Thermostat

Lead time: 2 weeks *CALL FOR AVAILABILITY*   The Kimray T12 Temperature Controller has a modulated, or throttling, signal output. Can be direct or indirect signal output based on how it is installed. Connection Size: 0.5 " Connection...

Kimray

30 HPG-D REG PILOT, AHJ

The Kimray 30 HPG-D Reg Pilot is a pressure sensing device designed to output a gas signal based on a set pressure. These pilots are commonly used on control valves to operate them as Backpressure or Pressure Reducing regulators.